PUR - Basic Faucet Filter, 2 Pack

- No.1 seller of faucet filtration system in US Certified by NSF & WQA
- No.1 seller of faucet filtration system in US(1)

- Certified by NSF & WQA

- Certified to reduce over 70 kinds of contaminants including 99% Lead, 2% certain pesticide, 96% mercury, etc (2)

- Maxion filtration techbology using activated carbon and ion exchange materials for better contaminants reduction performance

- Each filter could filter up to 30 gallons (113liter) / 480 cups 8 oz (236ml) water or use up to 2 months

- CleanSensor Monitor Filter indicator tells you the status of your filter and reminds on the replacement period

- Easy installation with no tool required


1 Based on 3rd parties sales data for the 52 weeks ending 24/2/2018

2 Test and certified by NSF / WQA based on NSF/ANSI standard 42,53 & 401


Certification of NSF standard 42:
http://info.nsf.org/Certified/DWTU/Listings.asp?Company=03210&Standard=042

Certification of NSF standard 53:
http://info.nsf.org/Certified/DWTU/Listings.asp?Company=03210&Standard=053

Certification of NSF standard 401:
http://info.nsf.org/Certified/DWTU/Listings.asp?Company=03210&Standard=401

Certification of WQA: https://www.wqa.org/find-products#/keyword/kaz


Hints:

PUR faucet filtration system fit most of the standard faucet. Apart from the thread on faucet mounting nut, 3 backup adapters and washers are included for installation on below faucet. Ensure your faucet is in compatoble size before purchases.


Faucet Measurement Method

Step 1: Remove original aerator and its washer

Step 2: Measure the faucet size


FAQs

HOW MANY CONTAMINANTS DOES MY FILTER REDUCE?

PUR faucet mount systems are certified by NSF International to reduce 72 contaminants and substances, including sediment, chlorine (taste and odor) and its by-products.


HOW DO I KNOW WHEN THE FILTER NEEDS TO BE REPLACED?

Depending on the quality of your water, faucet mount filters should be changed every 100 gallons (378 Liter) or about every 3 months, whichever comes first. If your unit features an LED indicator light, it will turn from green to yellow or red when the filter needs to be replaced. The light will flash only when in use. Green indicates the filter is working. Yellow indicates the filter will need to be replaced soon, while a red light means the filter needs to be replaced immediately.


CAN I RUN HOT WATER THROUGH THE FILTER?

Do not use the water above 100°F/38°C as this may alter the filter.


DO I NEED TO SOAK MY FILTER BEFORE USE?

Yes, for faucet mounts run cold water for 5 minutes in the filtered position upon first use.


IS MY REPLACEMENT FAUCET FILTER REFILL HARD TO INSTALL?
Replacing the filter is easy. Simply twist off the top cover, remove the old filter, put in the new one, and replace the top cover. Also, it is important to run cold water through the filter for five minutes before use.